The Menics MT4B4BL-RYGB 4 stack tower light has a 45mm diameter and is rated for 110-120V. It has red, yellow, green, & blue lenses, with a steady light. The prism cut lenses provide an even light distribution. The signal light itself comes pre-assembled, with a lead wire connection. It has integrated vibration-absorbing rubber for use around machines and other high-vibration environments. Uses incandescent bulbs. Uses incandescent bulbs. Rated IP 54. Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request. See the link to our accessory chart below the description to find out which mounting accessories are compatible with each other.

Specifications

• Mounting- Pole Mount or Wall Mount (with pole) - see mounting accessories below
• Light Operation- Steady
• Power Supply- 110-120V AC
• Current Draw- 0.16 Amps
• Lead Length- 25"
• Lens Colors- Red/Yellow/Green/Blue
• Lens Material- Polycarbonate Resin
• Number of Tiers- 4 Stack
• Dimensions (Tower Light Only)- 266.5 mm Height x 45 mm Diameter (10.49" x 1.77")
• Vibration- 3 mm @10~55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Ambient Humidity- 45-85% Relative Humidity
• Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 54 (Protected from harmful dust deposits and splashing water from any direction)
• Approvals- UL, CE, RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

Menics MT4B4BL-RYGB 4 Tier Red/Yellow/Green/Blue 110-120V Tower Signal Light