The Meltric 63-98043 DSN150 male inlet is rated for 480V and 150A. It features 3 Poles plus ground. It has a wiring capacity of 4-2/0 AWG with a temperature range of -40 F to 140 F. The body is fiberglass reinforced blue thermoplastic polyester, with silver-nickel contacts. The housing is impact resistant and also withstands chemical and UV exposure. It has two tabs on the sides so the receptacle can easily latch on to it for a more secure fitting. Type 4X for water tightness, rated IP 66 / IP 67. UL listed.
Note: Image is for reference, actual part may differ. Ground shipping only
Specifications
- Rated Voltage- 480V AC
- Rated Current- 150A
- Overall Dimensions- 5.11" Width x 4.59" Height x 4.14" Depth
- Polarity- 3 Pole + Ground
- Switch Rating (AC only)- Branch Circuit & Motor Circuit Disconnect Switching
- Horsepower Rating- 3Ø 75 hp
- Short Circuit Rating- 100kA Close & Withstand (testing with 225A RK1 non-time delay Mersen fuses),
10kA Close & Withstand (testing with 400A RK1 non-time delay Mersen fuses)
- Temperature Range- -40 F to 140 F (-40 C to 60 C)
- Wiring Capacity- 4-2/0 AWG
- Terminal Type- Screw
- Environmental Rating- Type 4X, IP 66 / IP 67
- Listings- UL, CSA
The 63-98043, part of the Meltric DSN Decontactor series, provides optimum safety by greatly reducing the chances of arc flash. The durable construction is made to last without immediately needing replacement parts, which in turn reduces costs. The compact design of this power connector does not take up a lot of unneeded space. It creates a watertight assembly when attached to the corresponding female receptacle, making it ideal for wet or washdown applications in industrial environments. These connectors also have plug and play capability for a quick and easy disconnect, making for more streamlined operation by having minimal downtime.
Silver nickel contacts: 85% silver, 15% nickel combination. Provides a durable and highly conductive contact point. Oxidation will not greatly hinder its contact resistance. Withstands repeated connecting and disconnecting
Lockout tagout capability: A 5/16" hole in the plug housing makes it easy to use a padlock on the plug if necessary, in order to keep it from being inserted into a receptacle.
Meltric DSN Series User Manual
Meltric DSN150 150A, 480V, 3 Pole + Ground Male Inlet
