 |
The Macromatic VWKP120A is a voltage monitor relay. This 8 Pin plug-in relay has a nominal voltage of 120V AC and an output of 10A DPDT. This voltage band relay is used for equipment that has to work within a certain voltage range. The VWKP120A features adjustable over and under voltage presets, as well as an adjustable drop out time delay ranging from 0.1-10 sec. The VWKP120A has an LED that is red to indicate when the unit is energized or green when it is not. It uses an 8 Pin 70169-D octal socket.
Note: Image is an approximation. Actual part may differ.
Specifications
- Relay Function- Voltage Band
- Nominal Voltage- 120V AC
- Output- 10A DPDT
- Drop-out Time Delay- 0.1-10 sec
- Over Voltage Range- 90-150V AC
- Under Voltage Range- 68-142V AC (75-95% of Nominal)
- Load- <2VA
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Voltage Tolerance- +/-50% of Nominal Voltage
- Output Contacts- 10A @ 240V AC, 7A @ 30V DC, 1/4HP @ 120/240V AC, C300
- Life- Mechanical: 10,000,000 Operations
Full Load: 100,000 Operations
- Response Time- Pick-up: 0.5 sec
Drop-out: 0.1-10 sec
- Reset- Automatic
- Transient Protection- 2000 volts per IEC 61000-4-5 Level 3 (+/- 2kV)
- Dimensions- 2.4" Height x 1.7" Width x 3.5" Depth
- Approvals- UL and CUL recognized, CE, UL & CUL listed (with Socket)
When the voltage stays between the preset over and under voltage settings, the unit stays energized. If the voltage goes over or under the preset range for a greater duration than the drop-out time delay, it de-energizes. Once the voltage goes back within the safety range for a longer duration than the 0.5 sec pick up delay, the relay is energized again.
Macromatic VWKP Series Relay Installation Manual
120VAC Voltage Band Monitor Relay Macromatic VWKP120A
|
|
|
