The Macromatic TD-81626-40 is an Off Delay Time Delay Relay. This programmable plug-in relay has an input voltage of 12V DC at 50/60Hz and 10A DPDT output contacts. The timing ranges are digitally selected by 10 position binary DIP switch, from 0.1 to 102.3 seconds. The TD8162640 uses an 11 pin 70170-D octal socket. It features an LED indicator to show the current status of the relay. It shows green when the power is on, and red once the relay is energized. Note: Image is for reference, actual part may differ

Specifications

Function- Off Delay
Timing Range- 0.1 - 102.3 Seconds
Input Voltage- 12V DC
Output- 10A DPDT
Voltage Tolerance- AC Operation: +10/-15% of nominal at 50/60 Hz.
DC Operation: +10/-15% of nominal.
Load- 2VA
Setting Accuracy- Constant Voltage/Temp: The greater amount of +/- 0.1% of set time or +/-50ms, Variable Voltage/Temp: The greater amount of +/- 1% of set time or +/- 50ms.
Repeat Accuracy- Constant Voltage/Temp: The greater amount of +/-0.1% of set time or +/-0.02 sec, Variable Voltage/Temp: The greater amount of +/- 1% of set time or +/- 0.02 sec.
Reset Time- 0.04 Seconds
Start Up Time- 0.05 Sec
Maintain Function Time- 0.01 Sec
Insulation Voltage- 2000 V
Operating Temperature- -28 C to 65 C (-18 F to 150 F)
Storage Temperature- -40 C to 85 C (-40 F to 185 F)
Output Contacts- DPDT 10A @ 240V AC/30V DC,
1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120V AC (N.C.)
B300 & R300, AC15 & DC13
Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
Dimensions- 2.4" Height x 1.7" Width x 3" Depth
Approvals- UL recognized, CE, CSA, UL listed (with Socket)

The Off Delay function means that the output is energized through the use of a trigger, in this case, a control switch. The time delay starts when the trigger is taken out. The output becomes de-energized once the time delay stops. Re-introducing the trigger before the time delay stops resets the time delay. Input voltage must be in place before the trigger and time delay can take effect. Each DIP switch is labeled with a time increment. Move the necessary switches to the ON position and add up their labeled values to set the time delay. For example, to set the time delay for 2.5 seconds, the switches for 0.1, 0.8, & 1.6 would be moved to the ON position.

Macromatic TD-8 Series Relay Installation Instructions

Explanation of Macromatic Time Delay Relay Timing Functions

Macromatic TD-8 Series Time Delay Relay Competitive Comparison

12V DC 0.1-102.3 Second Off Delay Plug-In Timer Relay TD-81626-40