 |
The Macromatic TD-70222 is an On Delay Time Delay Relay. This 8 pin plug-in relay has an input voltage of 120V AC/DC with an output of 10A DPDT. It has a time range of 0.05 sec to 999 hours. The unit has one pushbutton thumbwheel that chooses one of seven time ranges, while three other thumbwheels digitally set the precise time delay within that range. The red LED shows the status of the timing mode and time out conditions. The TD70222 uses an 8 pin 70169-D octal socket.
Note: Image is an approximation. Actual part may differ.
Specifications
- Relay Function- On Delay
- Relay Timing Range- 0.05 Sec - 999 Hours
- Input Voltage- 120V AC/DC
- Output- 10A DPDT
- Voltage Tolerance- AC Operation: +10/-15% of nominal at 50/60 Hz
DC Operation: +10/-15% of nominal
- Load- 3VA
- Setting Accuracy- Constant Voltage/Temp: The greater amount of +/-0.1% of set time or +/-50ms, Variable Voltage/Temp: The greater amount of +/- 1% of set time or +/- 50ms.
- Repeat Accuracy- Constant Voltage/Temp: The greater amount of +/-0.1% of set time or +/-0.02 sec, Variable Voltage/Temp: The greater amount of +/- 1% of set time or +/- 0.02 sec.
- Reset Time- 0.1 Seconds
- Start Up Time- 0.05 Sec
- Maintain Function Time- 0.01 Sec
- Insulation Voltage- 2000 V
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Output Contacts- DPDT 10A @ 240V AC/30V DC,
1/2HP @ 120/240V AC (N.O.), 1/3HP @ 120/240V AC (N.C.)
B300 & R300; AC15 & DC13
- Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
- Dimensions- 2.4" Height x 1.7" Width x 3" Depth
- Approvals- UL Recognized, CE, CSA, UL Listed (with Socket)
With the On Delay function, the time delay starts when the input voltage is introduced. The relay energizes after the time delay. The relay de-energizes when the input voltage is taken out, which also resets the time delay. Pilot duty rating
Macromatic TD-7 Series Relay Installation Instructions
Macromatic 120V On Delay Time Delay Relay TD-70222
|
|
|
