 |
The Macromatic SFP240B250 is a pump seal failure relay. This 11 Pin plug-in relay has an input voltage of 240V. It is a single channel relay made for sensing leaks in submersible pump seals and has an output of 7A DPDT. The sensitivity is adjustable from 1K to 250K Ohms using the low profile adjustment knob. Single channel means the relay detects leaks for one pump. The SFP240B250 has an LED indicator that glows red when the unit senses a leak. If there is no leak, it stays green. It uses an 11 pin 70170-D octal socket.
Note: Image is an approximation, actual part may differ
Specifications
- Relay Function- Pump Seal Failure, Single Channel
- Input Voltage- 240V AC
- Output- 7A DPDT
- Sensitivity Range- 1K to 250K Ohm
- Voltage Tolerance- +10/-15% of nominal
- Load- 3VA
- Probe Voltage- 5V DC Pulsed
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Output Contacts- 7A @ 240V AC / 7A @ 28V DC, 1/4 HP @ 120V AC (N.O.)
- Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
- Response Time- Pick up: 1 sec, Drop out: 1 sec
- Dimensions- 2.4" Height x 1.7" Width x 3" Depth
- Approvals- UL and CUL Recognized, CE, UL & CUL Listed (with Socket)
Resistance is measured by a probe inserted in the pump seal cavity. If a leak occurs, contaminating fluid going into the seal cavity causes the resistance between the probe and the common connection to drop. The relay energizes when the resistance drops lower than the preset sensitivity point.
Macromatic SFP Series Relay Installation Instructions
SFP240B250 Single Channel 240V Pump Seal Failure Relay
|
|
|
