 |
The Macromatic ARP024A2R is an alternating relay. This 11 Pin plug-in relay has a control voltage of 24V AC. It is a DPDT duplexor relay used in situations in which the run time of two loads has to be equalized. It has an output of 10A DPDT. A control switch starts the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. It uses an 11 pin 70170-D octal socket.
Note: Image is an approximation. Actual part may differ.
Specifications
- Relay Function- Alternating Relay
- Control Voltage- 24V AC/DC
- Output- 10A DPDT
- Voltage Tolerance- +10/-15% of control voltage at 50/60 Hz
- Load- <3VA
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Output Contacts- 10A @ 240V AC / 30V DC, 1/2 HP @ 120/240V AC (N.O.), 1/3 HP @ 120/240V AC (N.C.), B300, R300 (N.O.) Pilot Duty
- Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
- Dimensions- 2.4" Height x 1.7" Width x 3.1" Depth
- Approvals- C UR US, CE, CSA, C UL US (with Socket)
The ARP024A2R has 2 LEDs that indicate which load energizes next. The unit also has a low profile selector switch to lock into one load, so only one load remains energized. This is beneficial if one load has been used more than the other, so the on-time can be balanced.
Macromatic ARP Series Relay Installation Manual
Macromatic ARP024A2R 24V Dual Load Alternating Relay
|
|
|
