 |
The Macromatic ARP012A3R is an alternating relay. This 8 Pin plug-in relay has a control voltage of 12V with a 10A DPDT cross wired output. This relay is used in situations where the run time of two loads needs to be equalized and when added load capacity is needed. A control switch starts the alternating action. The output contacts on the relay change state when the initiating switch opens, so the loads alternate. It uses an 8 pin 70169-D octal socket.
Note: Image is an approximation, actual part may differ
Specifications
- Relay Function- Alternating Relay, DPDT Cross Wired
- Control Voltage- 12V AC/DC
- Output- 10A DPDT Cross Wired
- Voltage Tolerance- +10/-15% of control voltage
- Load- <3VA
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Output Contacts- 10A @ 240V AC / 30V DC, 1/2 HP @ 120/240V AC (N.O.), 1/3 HP @ 120/240V AC (N.C.), B300, R300 (N.O.) Pilot Duty
- Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
- Dimensions- 2.4" Height x 1.7" Width x 3.1" Depth
- Approvals- C UR US, CE, CSA, C UL US Listed (with Socket)
The ARP012A3R features 2 LEDs that indicate which load energizes first. The unit also has a low profile selector switch to lock into one load, so the same load runs first. This can help to even out load usage if one ends up being favored more than the other.
Macromatic ARP Series Relay Installation Manual
ARP012A3R Macromatic 12V Alternating Relay
|
|
|
