 |
Hirschmann GDM 2009 J Gray Solenoid Valve Connector with center screw (P/N: GDMZRG29000, Hirschmann order code: 931236-106). The GDM 2009 DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 2 Poles + Ground, an 18 mm Pin Spacing, gray fiberglass reinforced polyamide housing, and a PG 9 cable entry which accepts 4.5 mm to 7 mm cable. Hardwired. Type of connection: screw termination. The GDM-series rectangular connectors are strong enough to withstand high loads, and are water and dust proof to IP 65 standards. The GDM 2009 J Gray is a tailored industrial connector with a versatility for nearly any application in which hydraulic, pneumatic and electro-magnetic actuators have to deliver reliable service. Used primarily as a solenoid valve or sensor connector. The rectangular connectors of the GDM-series are well-equipped to handle the demands of field operation.
What's Included: (1) GDM 2009 J Gray Connector & (1) M3 x 35mm Nickel Plated Brass Center Screw.
- Installation-friendly, thanks to a large pinplate cable connecting area
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, UR, CSA, GL approvals
- Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
- For voltages up to 400 VDC and for currents up to 16 Amps
- Protection class up to IP 65
- Note: See images for drawings
Specifications
- Housing Color- Grey
- Type of Contact- screw termination / cable shoe / cable eye
- Contact Spacing- 18 mm
- Number of Poles- 2 Poles + Ground
- Housing Dimensions- 34.2mm H x 51mm L x 27.5mm W
- Cable Entry- PG 9 - Accommodates 4.5 mm to 7 mm cable
- Maximum Conductor Size- 16 AWG
- Center Screw- M3 x 35
- Gasket- No Gasket
- Nominal Current- 250 VAC / 16 amps
- Operating Temperature- -40 F to +257 F
- Protection Class- IP 65
- Contact Resistance- <= 4 mOhm
- Contact Surface Material- Sn
- Contact Bearer Material- PA
- Contact Bearer Housing- PA
- Inflammability Class Housing- 94 HB
- Inflammability Class Contact- 94 V0
- Approvals- UR, VDE, SEV, CSA, CE, ROHS
The Hirschmann GDM series of solenoid valve connectors is intended to withstand the stresses of hydraulic, pneumatic and electromagnetic actuator and sensor installations. When your application requires a durable solution, the GDM-series is fully within its element. For this reason, the GDM 2009 J connector features a high load capacity and works with solenoid valves, pressure sensors, flow controllers and in heating equipment in control systems for gas appliances and oil burners. Even in vibration-endangered devices and structural components, such as construction machines or in conveyor installations, it is possible to have a highly reliable solution through the use of crimp technology. Built-in optional electronic components can include rectifiers, optical status displays and protective elements, which allow the GDM-series to be connected to devices where these functions have not been added. Last but not least, the GDM-series can be used wherever a "metal-free" environment is required, for example in the food sector, or the chemical industry
Hirschmann Gray PG 9 2 + Ground Form A DIN 43650 Connector
|
|
|
