 |
Hirschmann GDM 2011 J Gray Solenoid Valve Connector with center screw and 3-7 Flat Gasket (P/N: GDMZRG2110370, Hirschmann order code: 932106-106 + 730801-002) The GDM 2011 DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 2 Poles + Ground, an 18 mm Pin Spacing, gray fiberglass reinforced polyamide housing, and a PG 11 cable entry which accommodates 6 mm to 9 mm cable. Hardwired. Type of connection: screw termination.
- What's Included: (1) GDM 2011 J Gray Connector, (1) M3 x 35mm Nickel Plated Brass Center Screw & (1) 3-7 Nitrile Flat Gasket
- Stands up to high loads
- Used as a solenoid valve or sensor connector
- Installation-friendly, thanks to a large pinplate cable connecting area
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, UR, CSA, GL approvals
- Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
- For voltages up to 400 VDC and for currents up to 16 Amps
- Useful for nearly any application with hydraulic, pneumatic, or electro-magnetic actuators
- Protection class up to IP 65
- Note: See images for drawings
Specifications
- Housing Color- Grey
- Type of Contact- screw termination / cable shoe / cable eye
- Contact Spacing- 18 mm
- Number of Poles- 2 Poles + Ground
- Housing Dimensions- 34.2mm H x 53mm L x 27.5mm W
- Cable Entry- PG 11 - Accommodates 6 mm to 9 mm cable
- Maximum Conductor Size- 16 AWG
- Center Screw- M3 x 35
- Gasket- GDM 3-7: Flat NBR/Buna-N - Resists most oils & many acids
- Nominal Current- 250 VAC / 16 amps
- Operating Temperature- -40 F to +257 F
- Protection Class- IP 65
- Contact Resistance- <= 4 mOhm
- Contact Surface Material- Sn
- Contact Bearer Material- PA
- Contact Bearer Housing- PA
- Inflammability Class Housing- 94 HB
- Inflammability Class Contact- 94 V0
- Approvals- UR, VDE, SEV, CSA, CE, ROHS
Can be compatible with MPM/Woodhead C18211G22 (Housing height 27 mm, 8-10 mm cable entry)
The Hirschmann GDM series of solenoid valve connectors was specifically designed to work under the stresses of hydraulic, pneumatic and electromagnetic actuator and sensor installations. When your application requires a rugged solution, the GDM-series is totally within its element. For this reason, the GDM 2011 J connector features a high load capacity and works with solenoid valves, pressure sensors, flow controllers and in heating equipment in control systems for gas appliances and oil burners. Even in vibration-endangered devices and structural components, such as construction machines or in conveyor installations, it is possible to have a highly reliable solution using crimp technology. With electronic component options such as rectifiers, optical status displays and protective elements, the GDM-series can be connected to devices where these functions have not been integrated. Last but not least, the GDM-series can be used wherever a "metal-free" environment is required, for example in the food sector, or the chemical industry
Hirschmann PG 11 DIN 43650 Solenoid Valve Connector with NBR Gasket
|
|
|
