The EternaBond OPS-1 EternaPrime spray on surface conditioner is made for surfaces that are particularly dirty and can't be cleaned easily. It is also useful for rough and porous surfaces.
- Required before applying EternaBond when temperatures are very low
- Takes loose particles and forms a solid surface for the tape to stick to
- Consists of a VOC exempt solvent that blends in a mixture of elastomers and resins
- Useful on tar, gravel, mortar, wood, and concrete
- Meets federal government health & environmental safety standards
- Do not use EternaPrime on PVC material
Specifications
- Size: 14 oz
- Application Temperature: -20 F to 205 F
- Drying Time at 60 F: 15 min (longer in cold temperatures)
- Film Thickness: +/- 4 mils when wet
- Flash Point: 110 F (43 C)
- Viscosity: 135-152 cps
How To Use
The area should be dry and free from large amounts of debris or other substances before EternaPrime can be used. EternaPrime can then be sprayed onto the surface .
EternaBond EternaPrime Downloads
EternaBond OPS-1 Surface Conditioner Spray