Home > Sealant Tape & Leak Repair >

EternaBond 2" x 4' White Emergency Micro-Sealant Tape

EternaBond RVEMT Micro-Sealant Tape
EternaBond RVEMT 2" x 4' White Emergency Micro-Sealant Tape
  
Alternative Views:
Price: $11.85
MFG P/N: RVEMT
MFG: EternaBond
Weight (lbs): 1

Quantity in Stock :9


Availability: In Stock
Product Code: RVEMT
Qty:

Description
 

The EternaBond RVEMT Emergency Micro-Sealant tape is white with a 4 foot length and a 2 inch width. Total thickness is 65 mil (+/- 2 mils). This mini-roll of tape is intended for use in quick repairs and creates a long lasting, permanent seal.

  • Perfect for quick repairs
  • Extra thick for greater protection
  • UV stable backing
  • Liquid tight - blocks air & moisture
  • Only small amount of surface prep needed
  • High flexibility - can be used in extremely low temps
  • Sticks to itself & fits around objects
  • Silicone lining on adhesive prevents tape from sticking before application
  • Uses MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and non-curing rubber with a built-in primer
  • For quick fixes in leak repair such as roof seams, basement walls, shower stalls, toilet tanks, sinks, pool lining and around skylights
  • Works on EPDM, TPO, Hypalon, fiberglass, metal and other kinds of roofing material.

Specifications

  • Roll Size: 2" x 4'
  • Color: White
  • Adhesion: 20 lbs+ /in width
  • Application Temperature: -20 F to 150 F ambient
  • Elongation: > 700% +/- 100
  • Low Temperature Flexibility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Tensile Break PSI: 4500 PSI +/- 500 PSI
  • Total Thickness: 65 mil +/- 2 mil
  • Water Vapor Test (ASTME 96B): 0.005 grms/100" sq./24hrs/100 F

Installation

Make sure the area is dry and free from debris or other substances before applying this Micro-Sealant tape. Remove the lining as the tape is being applied to prevent mistakes and to keep the tape from touching any other surfaces. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. It can be applied to surfaces up to 150 F ambient. If the ambient temperature is 40 F to -20 F, the surface should be treated with EternaPrime surface conditioner before application.

EternaBond RVEMT Downloads

EternaBond RVEMT Emergency Leak Repair Tape