Home > Sealant Tape & Leak Repair > EternaBond DoubleStick Tape >

EternaBond 4" x 50' DoubleStick Sealant Tape


EternaBond DoubleStick
EternaBond DS-4-50 4" x 50' DoubleStick Sealant Tape
 
Alternative Views:


Price: $97.60
MFG P/N: EB-6D040-50R
MFG: EternaBond
Weight (lbs): 4

Quantity in Stock :14


Availability:
In Stock
Product Code: DS-4-50
Qty:

Description
 

The EternaBond DS-4-50 DoubleStick tape has a 50 foot length and a 4 inch width. The double side adhesive and high flexibility allows it to be molded in and around other objects. It maintains its hold without the adhesive getting too dry.

  • Provides a permanent seal between two surfaces
  • Two silicone linings prevent tape from sticking to anything before application
  • Works like a gasket
  • Liquid tight
  • Can keep out dirt & insects
  • Fills gaps between two different surfaces
  • Ideal for window installation, pipe repair, and around seams
  • Features MicroSealant Technology - 100% solids formulation consisting of synthetic resins, thermoplastics and noncuring rubber with a built-in primer
  • Works with EPDM, TPO, most PVC, CSPE/Hypalon, CPE , SBS, APP modifieds, aluminum, galvanized steel, wood, most plastics, fiberglass, brick, concrete, and roofing material

Specifications

  • Roll Size: 4" x 50'
  • Adhesion: 19 lbs/in width
  • Application Temperature: -20 F to 150 F ambient
  • Dielectric Strength: Over 12 kV
  • Elongation: > 500%
  • Insulation Resistance: 10 to the 6th power mO
  • Low Temperature Flexibility: 1/2" radius at -30 F
  • Flexibility Temperature Range: -70 F to >200 F
  • Permanence: 0.001 perms max.
  • Pliability: No cracks in membrane
  • Shelf Life: Up to 5 years
  • Total Thickness: 60 mil
  • Water Vapor Test: 0.005 grms/100" sq./24hrs/100 F

Installation

The area must be dry and free from debris or other substances before DoubleStick can be applied. When using the tape to bond two surfaces, take off the liner on one side as the tape is being applied. This prevents mistakes and keeps the tape from coming into contact with other surfaces or objects. Pressure should be applied to set up the bonding process and remove any air bubbles. This can be done with your hand, although a steel roller provides the best results. Then remove the second lining and apply the other surface. When molding the tape around a surface or into a gap, remove the lining on both sides. The tape can then be twisted and molded to suit your purposes. If the ambient temperature is 40 F to -20 F, the surfaces should be treated with EternaPrime surface conditioner before applying.

EternaBond DoubleStick Downloads

EternaBond DS-4-50 Leak Repair Tape