![](/v/vspfiles/templates/PFA2021/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/PFA2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/PFA2021/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/PFA2021/images/clear1x1.gif) |
The Deca CP2S-2E10R maintained unibody selector switch has a red head with a 1NO contact arrangement. Made for 22 mm mounting holes. It has a rated insulation voltage of 400V and rated terminal current of 8A.
Not illuminated. Front operator rated IP 66 (total protection from dust and from powerful water jets in any direction). A maintained selector switch remains in the same position until it is changed manually, rather than automatically returning to a previous position
- Positions are 45 degrees on either side of vertical
- Wire Push-In feature saves on installation time
- Spring clamps provide greater force to hold the wire in place
- Two wiring holes per contact
- Contact blocks are separated in the center for better insulation
- Works with solid or stranded wire, or European terminal wiring
- Unibody housing saves space
- Mounting panel thickness: 0.8 - 12 mm
Specifications
- Dimensions- 29 mm Diameter x 68.6 mm Length (1.14" x 2.7")
- Bezel- Plastic
- Selector Switch Type- Maintained
- Selector Switch Color- Red
- Positions- 2 (+/- 45 degrees from vertical)
- Contact Arrangement- 1NO (Normally Open)
- Insulation Resistance- 100 MOhm above (500V DC High Resistance Meter)
- Vibration Resistance- Operation Extremes: 5-55Hz, Amplitude: 0.5mm, Damage Limits: 30Hz, Amplitude: 1.5mm
- Shock Resistance- Operation Extremes: 100m/s2 Damage Limits: 1,000m/s2
- Dielectric Strength- 2,000V AC 1 min
- Operating Temperature- -25 C to 55 C (-13 F to 131 F)
- Storage Temperature- -45 C to 85 C (-49 F to 185 F)
- Ambient Humidity- 45-85% RH (Relative Humidity)
- Rated Insulation Contact Voltage- 400 V
- Rated Terminal Current- 8 Amps
- Rated Operating Contact Voltage (AC)- 12V, 24V, 120V, 240V, 380V
- AC Resistive Load- 8A @ 12V, 8A @ 24V, 8A @ 120V, 6A @ 240V, 3.8A @ 380V
- AC Inductive Load- 8V @ 12V, 8A @ 24V, 6A @ 120V, 3A @ 240V, 1.9A @ 380V
- Rated Operating Contact Voltage (DC)- 12V, 24V, 125V, 250V, 400V
- DC Resistive Load- 2.5A @ 12V, 2.5A @ 24V, 1.1A @ 125V, 0.55A @ 250V, 0.3A @ 400V
- DC Inductive Load- 2.5A @ 12V, 2.5A @ 24V, 0.55A @ 125V, 0.27A @ 250V, 0.15A @ 400V
- Degree of Protection- IP 66 (Front Panel) / IP 20 (Terminal Side)
- Approvals- UL & CUL Listed, CE
![](/v/vspfiles/assets/images/wirein.png)
Deca Red 1NO Unibody Selector Switch CP2S-2E10R
|
|
![](/v/vspfiles/templates/PFA2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/PFA2021/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/PFA2021/images/clear1x1.gif) |
![](/v/vspfiles/templates/PFA2021/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/PFA2021/images/clear1x1.gif)
|