BreezEV EVC-L2-48A-L1-1-4G-D-AU-P-1 is a 48 Amp wall mount electric vehicle charging unit with 4G LTE, RFID, and Ethernet communication, LCD screen, and a 1 year AmpUp PRO plan. It features Level 2 charging, which is compatible with every E-Vehicle manufacturer. Can be wall mounted or attached to a free-standing pedestal. Service plans are also available and are sold separately. Charger only. Cables and mounting pedestals sold separately (see accessories below). See below for directions on how to order a complete charging station

See revenue estimates with our Networked Charger Revenue Calculator

• Ideal for retail, commercial or municipal properties, or multi-unit housing
• AmpUp PRO software includes reporting, real time analytics, pricing & payment management, troubleshooting, and load management.
• Allows for various payment options
• Built-in LCD screen
• 4G LTE or Ethernet with AmpUp Open Charge Point Protocol (OCPP) cloud-based software
• RFID card reader
• 48 Amp max output, switchable down to 16 Amp
• Natural cooling
• UV resistant housing
• LEDs indicate status
• Can be used indoors or outdoors
• Includes 1 Year AmpUp PRO Plan & one-time activation fee
• Comes with:
  • Charging unit
  • Wall mount bracket
  • (2) M5 wall mounting screws
  • (4) M6 hexagonal wall mounting screws
  • (2) AmpUp QR code labels
  • Accessory kit
• Accessory kit comes with
  • Fittings for incoming power wires
  • Incoming power cable & charging cable
  • Holster
  • Mounting screws for the holster

Specifications

• Housing Dimensions- 9.8" Width x 13.8" Length x 5.1" Depth
• Screen Size- 4.3"
• Max Output- 48 Amps
• Rated Output Current- 16 / 32 / 40 / 48 Amps
• Input Voltage- 200-240V AC / Single Phase
• AC Power Frequency- 60 Hz
• Connector Type- SAE J1772
• Communication- Ethernet / RFID / 4G Cellular
• OCPP Software- 1 Year AmpUp PRO
• Input Protection- Undervoltage, Overvoltage, Reverse Charge, Surge Protection, Ground Fault Protection
• Output Protection- Overcurrent, Over Temperature, Control Pilot Fault Protection
• Storage Temperature- -40 F to 158 F
• Operating Temperature- -22 F to 122 F
• Relative Humidity- 95% Relative Humidity
• RJ45 Cable Inlet- 10M/100M Base-T
• 4G Function- LTE, GSM/GPRS
• Ingress Protection- IP 65 (total protection from dust and low pressure water jets from any direction)
• Impact Resistance- IK08
• Warranty- 3 Year Manufacturer's Warranty

HOW TO ORDER

1. Required: Choose cable set (see accessories below). You can choose between 40A or 48A. Many current EV models cannot charge at higher rates, so the lower 40A cables would be sufficient. Then pick the cable length. All cables are then field attached to the charger.
2. Optional: Choose mounting pedestal and brackets (see accessories below). Note: If you are wall mounting, you do not need any additional mounting equipment. Pedestal comes without cable management. If you need cable management, you will also need the separate cable management kit. Side by side bracket is needed if two chargers will be installed side by side on the same pedestal.

BreezEV EV Charger Installation Instructions

BreezEV Electric Vehicle Chargers Overview

BreezEV EVC-L2-48A-L1-1-4G-D-AU-P-1 Networked Commercial Electric Vehicle Charger