The Seifert 4421A4000 is a 204x204mm, 230Vac Gray Fan Filter Assembly. It can circulate air at a rate of 65 CFM, with a power consumption of 18W. It has an expected lifespan of 57,000 hrs and a noise level of 48/54 dB(a). Storage temperature: -40 C to 70 C (-40 F to 158). UL Approved. Comparable to Fandis FF13PA230UF

• Can mount without screws in square openings
• Possible attachment with screws for thicker cabinets (not supplied)
• Plate thickness between 1.3 and 3.2 mm.
• Plastic components made from ABS/PC alloy
• Color RAL 7035 Gray
• Permanent sealing gasket is polyurethane foam
• Filter media is thermo-linked progressive structure synthetic fiber
• Standard airflow
• Rated IP54
• UL E237844, CE, CSA approved

Seifert Fan Filter Assembly Downloads

Specifications

This fan system is used to filter and cool control cabinets, automation equipment & electronics. If the temperature inside an electronic device gets too high, it can cause data loss, equipment damage or failure. Using cooling fans keep internal temperatures down and provides ventilation. The filter media will also keep out dust and debris. This 4421A4000 fan is a non-active system, perfect when the temperature can be maintained using the ambient air.

The 4421A4000 can quickly streamline installation. No tools are required to mount the filter, you simply push it onto the enclosure. Sliding catches assist in attachment or removal of the cover. This allows the filter media to be replaced from the outside if necessary, without needing tools. The seal between the base and cover has been replaced by ribbing that directs water runoff to the outside. Airflow is directed from the outside to the inside of the cabinet.

204x204mm 230V Seifert Filter Fan 4421A4000