Network
Routing- Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)
Protocols- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SNMP, MQTT, Wake On Lan (WOL)
VoIP Passthrough Support- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection Monitoring- Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall- Port forward, traffic rules, custom rules
DHCP- Static and dynamic IP allocation, DHCP Relay, Relayed
QoS / Smart Queue Management (SQM)- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS- Supported >25 service providers, others can be configured manually
Network Backup- VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover

Security
Authentication- Pre-shared key, digital certificates, X.509 certificates
Firewall- Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack Prevention- DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN- Port and tag based VLAN separation
Mobile Quota Control- Set up custom data limits for both SIM cards
WEB Filter- Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access Control- Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN
Open VPN- Multiple clients and server can be running simultaneously, 12 encryption methods
Open VPN Encryption- DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec- IKEv1, IKEv2, supports up to (4) VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE- GRE Tunnel
PPTP, L2TP- Client/Server services can run simultaneously
Stunnel- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code
DMVPN- Method of building scalable IPsec VPNs
SSTP- SSTP client instance support
ZeroTier- ZeroTier VPN
WireGuard- WireGuard VPN client and server support

Modbus
TCP Slave-
ID Range- Respond to one ID in range [1;255] or any
Allow Remote Access- Allow access through WAN
Custom Registers- MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

TCP Master-
Supported Functions- 01, 02, 03, 04, 05, 06, 15, 16
Supported Data Formats- 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Data to Server Protocol- HTTP(S), MQTT, Azure MQTT

MQTT Gateway- Allows sending commands and receiving data from MODBUS Master through MQTT broker

Monitoring & Management
WEB UI- HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA- Firmware update from sever, automatic notification
SSH- SSH (v1, v2)
SMS- SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call- Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off, answer/hang-up with a timer
TR-069- OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT- MQTT Broker, MQTT publisher
SNMP- SNMP (v1, v2, v3), SNMP trap
JSON-RPC- Management API over HTTP/HTTPS
MODBUS- MODBUS TCP status/control
RMS- Teltonika Remote Management System (RMS)

IoT Platforms
Cloud of Things- Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx- Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity- Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub- Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

System Characteristics
CPU- Atheros Wasp, MIPS 74Kc, 550 MHz
RAM- 128 MB, DDR2
Flash Storage- 16 MB, SPI Flash

Firmware
Configuration-
WEB UI- Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA- Update FW/configuration from server
RMS- Update FW/configuration for multiple devices
Keep Settings- Update FW without losing current configuration

Customization-
Operating System- RutOS (OpenWrt based Linux OS)
Supported Languages- Busybox shell, Lua, C, C++
Development Tools- SDK package with built environment provided

Location Tracking
GNSS- GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates- GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA- NMEA 0183
NTRIP- NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server Software- Supported server software TAVL, RMS
Geofencing- Configurable multiple geofence zones

Input / Output
Input- (1) digital dry input (0 - 3 V), (1) digital galvanically isolated input (0 - 30 V), (1) analog input (0 - 24 V), (1) Digital non-isolated input (on 4 pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
Output- (1) digital open collector output (30 V, 250 mA), (1) SPST relay output (40 V, 4 A), (1) Digital open collector output (30 V, 300 mA, on 4 pin power connector)
Events- SMS, EMAIL, RMS

USB
Data Rate- USB 2.0
Applications- Samba share, USB-to-serial
External Devices- Possibility to connect external HDD, flash drive, additional modem, printer
Storage Formats- FAT, FAT32, NTFS

SD Card
Physical Size- Micro SD
Applications- Samba share, Storage Memory Expansion, DLNA
Capacity- Up to 64 GB
Storage Formats- FAT32, NTFS, ext2, ext3, ext4

Power
Connector- 4 pin industrial DC power socket
Input Voltage Range- 9 – 30 VDC reverse polarity protection; surge protection >31 VDC 10us max
PoE (Passive)- Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power Consumption- < 2 W idle, < 7 W Max

Environmental
Housing- Aluminum housing, plastic panels
Dimensions- 110 mm Width x 50 mm Height x 100 mm Depth (4.33" x 1.97" x 3.94")
Mounting Options- DIN rail (can be mounted on two sides), flat surface placement
Operating Temperature- -40 C to 75 C (-40 F to 167 F)
Operating Humidity- 10-90% non-condensing
IP Rating- IP 30 (Protected from objects 2.5 mm (0.1") in diameter or greater)

Approvals
Regulatory- CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance CE/RED, FCC, IC, PTCRB, RCM, EAC, CCC, RoHS, WEEE, IP rating, Anatel, GCF, REACH, E-mark, DNV GL, ECE Regulation 118, Morocco ANRT, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL), WiFi Certified, MODBUS Conformance
Operator- Verizon, AT&T
Vehicle- ECE R10 (E-mark), ECE R118
EMI Standards- Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0