Home > Panel Meters > C48 1/16 DIN Counters & Timers >

Red Lion Panel Meter, Batch Counter, AC, 1 NPN OC & 2 Relay Outputs, RS-485


Red Lion C48CB108 Panel Meter
Red Lion C48CB108 Panel Meter, Batch Counter, AC, 1 NPN OC & 2 Relay Outputs, RS-485
 
Alternative Views:


Price: $371.00
Note: Please call or email [email protected] for alternatives
MFG P/N: C48CB108
MFG: Red Lion
Weight (lbs): 0.38

Quantity in Stock :(Out of Stock)


Availability:
Out of Stock
Product Code: C48CB108
Qty:

Description
 

The Red Lion C48CB108 C48 series panel meter is a batch counter with 1 NPN OC & 2 relay outputs. It features a 2 line, 6 digit, transmissive LCD display with backlighting and a 1/16 DIN housing. The main process counter has dual presets and the secondary counter has one preset. The secondary counter is utilized as a batch or total counter. The backlit display shows a red readout on the main line and a green readout on the secondary line. The resistance to noise interference makes it perfect for industrial use. AC powered.

Features

  • Three Presets
  • Bi-directional & Quadrature Counting
  • Dual Line, 6 Digit Transmissive LCD Display w/Backlighting
  • Red Top Line & Green Lower Line
  • 1 NPN OC / 2 Relay Outputs
  • Up to 11KHz
  • NEMA 4X/IP65 - Front Panel
  • RS-485 Communications Capability
  • Field Replaceable Relay Output Board
  • Status Indicators for Outputs
  • Programmable User Inputs
  • Function Keys on Front Panel
  • Lightweight Housing Stands Up to Impact
  • Several Can be Stacked Horizontally or Vertically

Red Lion C48C Series User Manual

Specifications

Display
Main Display: 0.3" digits
Secondary Display: 0.2" digits
Annunciators: Value- PRS, 1, 2, & 3; Output- 01, 02, 03
Power Requirements
AC Power: 85-250 VAC, 50/60 Hz, 9 VA max
DC Power: 11-14 VDC @ 150 mA max
Memory
Nonvolatile E2PROM retains all programmable parameters and count values
Sensor Power
+12 VDC (+/- 15%) @100 mA max
Count Inputs A & B
Current Sourcing: 3.9KOhm pull-down, VIN max = 30 VDC
Current Sinking: 7.8KOhm pull-up to 12 VDC; ISNK = 1.8 mA max
Debounce: 50 Hz max
Lo Bias: VIL = 1.5 VDC max., VIH = 3.75 VDC min.
Hi Bias: VIL = 5.5 VDC max., VIH = 7.5 VDC min
User Inputs
Current Sinking: VIL = 1.5 VDC max, 22 KOhm pull-up to 5 VDC
Current Sourcing: VIH = 3.5 VDC min., VIN max = 30 VDC; 22 KOhm pulldown
Response Time: 10 msec max.
Inhibit Response Time: 250 usec max.
Outputs
Solid State: NPN Open Collector- ISNK = 100 mA max. @ VOL = 1.1 VDC max.; VOH = 30 VDC max.
Relay: Form A contact, Rating = 5 A @ 250 VAC, 30 VDC (resistive load), 1/10 HP @ 120 VAC (inductive load)
Relay Life Expectancy: 100,000 cycles min. at max. load rating
Standards Compliance
UL & CUL Recognized
Electrostatic Discharge: EN 61000-4-2
Electromagnetic RF Fields: EN 61000-4-3
Fast Transients (burst): EN 61000-4-4
RF Conducted Interference: EN 61000-4-6
Simulation of Cordless Phone: ENV 50204
RF Interference: EN 55011
Physical
Operating Temperature: 0 C to 50 C (32 F to 122 F)
Storage Temperature: -40 C to 70 C (-40 F to 158 F)
Humidity: 85% max. relative humidity (non-condensing) from 0 C to 50 C.
Altitude: Up to 2000 meters
Housing: Black Plastic
Electrical Connection: Wire clamping screw terminals
Dimensions: 1.95" x 1.95" x 4.54"
RS-485 Serial Communications
Baud Rate: Programmable from 1200 to 9600 baud
Address: Programmable from 0 to 99
Data Format: 10 Bit Frame, 1 start bit, 7 or 8 data bits, 1 or No Parity bit, & 1 stop bit
Parity: Programmable for Odd (7 data bits), Even (7 data bits), or None (8 data bits)

There are nine programmable counting modes & the unit can be programmed to register counts on both edges of the input signal. Programming modes & data values, changing the display, and resetting functions can all be done through the buttons on the front. User inputs can be sinking (active low) or sourcing (active high) through a single plug jumper. It features relay outputs for Output 2 and Output 3. Output 1 is a solid-state NPN current sinking, open collector output. Output 1 and Output 2 are for the primary process counter, while Output 3 is for the secondary batch or total counter. Two way communication with a printer, computer, or other device is possible with the RS-485 serial communication interface.

Panel Meter Comparison Chart