 |
 |
 |
|
Hirschmann GDMW 3011 DF High Voltage Gray Solenoid Valve Connector with center screw (Hirschmann order code: 932547-206) The GDMW 3011 DF DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 3 Poles + Ground, an 18 mm Pin Spacing, gray fiberglass reinforced polyamide housing, and a PG 11 cable entry which accepts 4.5 mm to 11 mm cable. Hardwired. Type of connection: screw termination. The GDMW-series rugged rectangular connectors are able to stand up to high loads, and are dust proof and waterproof to IP 65 standards. The GDMW 3011 DF Gray is a tailored industrial connector with a versatility that works well for almost any application in which hydraulic, pneumatic and electro-magnetic actuators have to provide reliable service. Primarily implemented as a solenoid valve or sensor connector. The rectangular connectors of the GDMW-series are well-equipped to deal with the stresses of field operation.
What's Included: (1) GDMW 3011 DF Gray Connector, (1) Nickel Plated Brass Center Screw
- Installation-friendly, thanks to a large pinplate cable connecting area
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, RoHS, SEV approvals
- Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
- For voltages up to 400 VDC and for currents up to 16 Amps
- Protection class up to IP 65
- Note: See images for drawings
Specifications
- Housing Color- Grey
- Type of Contact- screw termination / cable shoe / cable eye
- Contact Spacing- 18 mm
- Number of Poles- 3 Poles + Ground
- Housing Dimensions- 40.5 mm Height x 44.8 mm Length x 29 mm Width (1.59" x 1.76" x 1.14")
- Cable Entry- PG 11 - Accommodates 4.5 mm to 11 mm cable
- Conductor Cross Section- 0.25 - 1.5 mm2
- Operating Current- 400 V AC/DC / 16 amps
- Operating Temperature- -40 F to 257 F
- Protection Class- IP 65 - total protection from dust and low pressure water jets from any direction
- Contact Resistance- <= 10 mOhm
- Insulation Resistance- > 10^9 Ohm
- Contact Base Material- Copper Zinc
- Contact Surface Material- Copper / Tin
- Contact Bearer Material- Glass Fiber Reinforced Polyamide
- Contact Bearer Housing- Glass Fiber Reinforced Polyamide
- Inflammability Class Housing- UL 94 HB
- Inflammability Class Contact Bearer- UL 94 HB
- Approvals- VDE, SEV, ROHS
The Hirschmann GDMW series of solenoid valve connectors was intended to work under the demands of hydraulic, pneumatic and electromagnetic actuator and sensor installations. When your application requires a rugged solution, the GDMW-series is totally within its element. For this reason, the GDMW 3011 DF connector features a high load capacity and can be used with solenoid valves, pressure sensors, flow controllers and in heating equipment in control systems for gas appliances and oil burners. Even in vibration-endangered devices and structural components, such as construction machines or in conveyor installations, it is possible to have a highly reliable solution using crimp technology. With integrated electronic component options such as rectifiers, optical status displays and protective elements, the GDMW-series can be connected to devices where these functions have not been built-in. Last but not least, the GDMW-series can be used wherever a "metal-free" environment is required, for example in the food sector, or the chemical industry
Hirschmann Form A DIN 43650 High Voltage Solenoid Valve Connector
|
|
|
 |
|
 |
|
