Remphos by Light Efficient Design RP-LBI-OC2-A is a 4.7" high/low motion and daylight sensor made for the LBI series light bars. It features plug and play operation, and works even behind a plastic or glass lens. It can attach to one end of a light bar, inline with other light bars, or to a linking cable. Note: Motion sensor does not come included with the light bars.

• Mounting height - Up to 40 Ft
• Detection radius - Up to 60 Ft diameter
• Operating temperature - -4 F to 158 F (-20 C to 70 C)
• Full control (high-low-off) on up to 15 light bars
• Limited control (high-low) on up to 40 light bars
• Can manage the 0-10V dimming signal in either direction
• Operates on 12V DC from the light bar
• Can differentiate between natural daylight & LED light
• Consumes less than 0.1 watts while on standby
• Memory function in case of power failure
• 4.7" sensor can set the light bar to a standard length once attached
• Kit includes: Motion sensor, surface mount magnetic clip, (2) dimmable seamless connectors, (2) screws, and a 12" dimmable linking cable
• Remote control (see below) is needed if settings need to be programmed outside of factory default settings
• Default settings - 50% sensitivity, disabled daylight sensor, 5 minute hold time, 30% twilight level
• Sold individually

Remphos LED Light Bar Motion Sensor Data Sheet

Remphos LBI Light Bar Motion Sensor