Home > Electrical Enclosures > Push Button Boxes >

Saginaw Hinged Push Button Enclosure, 4 Position, 22.5mm


Saginaw Hinged Push Button Box, 4 Position, 22.5mm
Saginaw SCE-4SPBHI Hinged Push Button Enclosure, 4 Position, 22.5mm
 
Alternative Views:


Price: $127.41
MFG P/N: SCE-4SPBHI
MFG: Saginaw Control & Engineering
Weight (lbs): 7.25



Availability:
In Stock
Product Code: SCE-4SPBHI
Qty:

Description
 

Saginaw Control & Engineering SCE-4SPBHI is a 4 position hinged push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 22.5mm pushbutton entrances in a 4x4 configuration. Made for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

  • 8.13" H x 8" W x 6" D (206.5mm x 203.2mm x 152.4mm)
  • Continuously welded seams
  • Cover screws thread into sealed wells
  • Continuous bolt-on hinge with stainless steel hinge pin
  • Works with any brand of oil-tight push buttons, switches, or pilot lights
  • 4 way standard push button entrance
  • Oil / water resistant gasket
  • Welded mounting plates located on the back at the top and bottom
  • Powder coating on both the inside and outside
  • Ground stud on door
  • Sub-panel supported by standoffs (sold separately)
  • IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Saginaw 4 Position Hinged Push Button Box SCE-4SPBHI


Related Products
Saginaw Steel Sub-Panel, for 8" x 8" Enclosure
Price: $6.13

Add
Saginaw SCE-8P8 Steel Sub-Panel