The Hirschmann BRS40-8TX/4SFP-EEC (P/N: 942170-019) is a 12 port managed industrial Ethernet Switch featuring Gigabit Uplink, a fanless design, extended temperature range, 8 x 10/100/1000Base-TX RJ45 ports, and 4 x 100/1000Mbit/s fiber SFP ports. PC-ABS housing. This DIN-Rail switch is part of the BOBCAT series that offers real-time communication using TSN. Bandwidth capability can be increased by adjusting the SFPs from 1 to 2.5 Gigabit. Has 5 year manufacturer's guarantee. SFP transceivers sold separately.

Hirschmann BRS BOBCAT Series Manual

Specifications

More Interfaces
Power supply/signaling contact	1 plug-in terminal block, 6-pin
Digital Input	1 plug-in terminal block, 2-pin
Local Management & Device Replacement	USB-C
Network size - Length of cable
Twisted pair (TP)	0-100 m
Single mode fiber (SM) 9/125 µm	See SFP fiber modules below
Single mode fiber (LH) 9/125 µm (long haul transceiver)	See SFP fiber modules below
Multimode fiber (MM) 50/125 µm	See SFP fiber modules below
Multimode fiber (MM) 62.5/125 µm	See SFP fiber modules below
Network size - Cascadibility
Line - / star topology	any
Power requirements
Operating voltage	2 x 12 - 24V DC
Power consumption	11 W
Power output in Btu (IT) h	38
Software
Switching	Independent VLAN Learning, Fast Aging, Static Unicast/Multicast Address Entries, QoS / Port Prioritization (802.1D/p), TOS/DSCP Prioritization, Interface Trust Mode, CoS Queue Management, Queue-Shaping / Max. Queue Bandwidth, Flow Control (802.3X), Egress Interface Shaping, Ingress Storm Protection, Jumbo Frames, VLAN (802.1Q), GARP VLAN Registration Protocol (GVRP), Voice VLAN, GARP Multicast Registration Protocol (GMRP), IGMP Snooping/Querier per VLAN (v1/v2/v3), Unknown Multicast Filtering, Multiple VLAN Registration Protocol (MVRP), Multiple MAC Registration Protocol (MMRP), Multiple Registration Protocol (MRP)
Redundancy	HIPER-Ring (Ring Switch), Link Aggregation with LACP, Link Backup, Media Redundancy Protocol (MRP) (IEC62439-2), Redundant Network Coupling, RSTP 802.1D-2004 (IEC62439-1), RSTP Guards
Management	Dual Software Image Support, TFTP, SFTP, SCP, LLDP (802.1AB), LLDP-MED, SSHv2, HTTP, HTTPS, Traps, SNMP v1/v2/v3, Telnet, IPv6 Management , OPC UA Server
Diagnostics	Management Address Conflict Detection, MAC Notification, Signal Contact, Device Status Indication, TCPDump, LEDs, Syslog, Persistent Logging on ACA, Port Monitoring with Auto-Disable, Link Flap Detection, Overload Detection, Duplex Mismatch Detection, Link Speed and Duplex Monitoring, RMON (1,2,3,9), Port Mirroring 1:1, Port Mirroring 8:1, Port Mirroring N:1, Port Mirroring N:2, System Information, Self-Tests on Cold Start, Copper Cable Test, SFP Management, Configuration Check Dialog, Switch Dump
Configuration	Automatic Configuration Undo (roll-back), Configuration Fingerprint, Text-based Configuration File (XML), Backup config on a remote server when saving, Clear config but keep IP settings, BOOTP/DHCP Client with Auto-Configuration, DHCP Server: per Port, DHCP Server: Pools per VLAN, AutoConfiguration Adapter ACA21/22 (USB), HiDiscovery, USB-C Management support, Command Line Interface (CLI), CLI Scripting, CLI script handling over ENVM at boot, Full-featured MIB Support, Context-sensitive Help, HTML5 based Management
Security	ISASecure CSA / IEC 62443-4-2 certified, MAC-based Port Security, Port-based Access Control with 802.1X, Guest/unauthenticated VLAN, Integrated Authentication Server (IAS), RADIUS VLAN Assignment, Denial-of-Service Prevention, DoS Prevention Drop Counter, VLAN-based ACL, Ingress VLAN-based ACL, Basic ACL, Access to Management restricted by VLAN, Device Security Indication, Audit Trail, CLI Logging, HTTPS Certificate Management, Restricted Management Access, Appropriate Use Banner, Configurable Password Policy, Configurable Number of Login Attempts, SNMP Logging, Multiple Privilege Levels, Local User Management, Remote Authentication via RADIUS, User Account Locking, Password change on first login
Industrial Profiles	EtherNet/IP Protocol, IEC61850 Protocol (MMS Server, Switch Model), Modbus TCP, PROFINET Protocol
Time synchronization	PTPv2 Transparent Clock two-step, PTPv2 Boundary Clock, BC with Up to 8 Sync / s , 802.1AS, Buffered Real Time Clock, SNTP Client, SNTP Server
Miscelleaneous	Digital IO Management, Manual Cable Crossing, Port Power Down
Ambient conditions
Operating temperature	-40 C to +70 C (-40 F to 158 F)
Storage/transport temperature	-40 C to +70 C (-40 F to 158 F)
Relative humidity (non-condensing)	1% to 95%
MTBF (Telecordia SR-332 Issue 3) @ 25°C	3119057 hours
Mechanical construction
Dimensions (W x H x D)	73 mm x 137.5 mm x 103.5 mm (2.87" x 5.41" x 4.07")
Mounting	DIN Rail
Weight	570 g
Protection class	IP30
Mechanical stability
IEC 60068-2-27 shock	15 g, 11 ms duration
IEC 60068-2-6 vibration	5 Hz ... 8,4 Hz with 3,5 mm amplitude; 2 Hz ... 13,2 Hz with 1 mm amplitude; 8,4 Hz ... 200 Hz with 1 g; 13,2 Hz ... 100 Hz with 0,7 g
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD)	6 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field	10 V/m (80-2000 MHz); 5 V/m (2000-2700 MHz); 3 V/m (5100-6000 MHz)
EN 61000-4-4 fast transients (burst)	2 kV power line, 2 kV data line
EN 61000-4-5 surge voltage	power line: 2 kV (line/earth) and 1 kV (line/line); data line: 2 kV
EN 61000-4-6 conducted immunity	10 V (150 kHz-80 MHz)
EMC emitted immunity
FCC CFR47 Part 15	FCC CFR47 Part 15 Class A
EN 55022	EN 55032 Class A
Approvals
Safety of industrial control equipment	cUL 61010
Basis Standard	CE, FCC, EN61131, EN62368-1
Scope of delivery and accessories
Scope of delivery	device, terminal block for supply voltage & signal contact, terminal block for digital input depending on device variant, 2 Ferrites with key depending on device variant, safety & general info sheet

Hirschmann BRS40-8TX/4SFP-EEC 12 Port Ethernet Switch