Saginaw Control & Engineering SCE-1PBA is a 1 position sloped front push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and a 30.5mm pushbutton entrance. Ideal for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture where a slanted surface is needed.

• 3.5" H x 3.25" W x 4.87" D (89mm x 82.55mm x 123.7mm)
• Continuously welded seams
• Cover screws thread into sealed wells
• Compatible with any brand of oil-tight push buttons, switches, or pilot lights
• 4 way standard push button entrance
• Gasket is oil & water resistant
• Comes with mounting feet
• IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

1 Position 30.5mm Sloped Push Button Box Saginaw SCE-1PBA