The Menics PRE-510-RYGBC 5 stack LED tower signal light is rated for 110V AC with a 56mm diameter. It has red, yellow, green, blue, & clear lenses with a steady light and is prewired with 25" lead. The PC plastic lenses are prism cut to provide consistent light distribution. The silver bands clearly define each tier. The tower light itself comes preassembled. Rated IP 56.

Mounting (See mounting accessories below)

• Pole Mount: Pole + Base
• Wall Mount: Pole + Wall Bracket (MAP-DS40), Pole + 70 mm Base + Wall Bracket (MAP-DS30 or MAM-DS28), or Threaded Pole + Wall Bracket (MAM-DS25)
• Surface Mount: 22 mm Pole (MAP-0022) + Base or Threaded 43 mm Pole (MAP-M043). Threaded pole would be inserted into a pre-drilled hole using lock nuts on either side to tighten in place.
• See our mounting accessories chart (link below description) to see which poles and bases are compatible
• Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request

Specifications

• Operation- Steady
• Power Supply- 110V AC
• Mounting/Connection- Pole Mount / Lead Wires (25" Lead Length)
• Lens Colors- Red Yellow Green Blue & Clear
• Lens Material- Polycarbonate
• Number of LED Tiers- 5 Tiers
• Dimensions (Tower Light Only)- 312 mm Height x 56mm Diameter (12.28" x 2.2")
• Current- 0.155 Amps
• Insulation Resistance- 100MOhm min (500VDC mega)
• Vibration- 10~55Hz, amplitude 0.75mm
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Storage Temperature- -15 C to 40 C (5 F to 104 F)
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 56 (Protection from harmful dust deposits and powerful water jets from any direction)
• Approvals- CE, RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

PRE-510-RYGBC 110V AC 5 Tier LED Tower Signal Light