Home > Electrical Enclosures > Push Button Boxes >

Saginaw Hinged Push Button Enclosure, 9 Position, 22.5mm


Saginaw Hinged Push Button Box, 9 Position, 22.5mm
Saginaw SCE-9PBHI Hinged Push Button Enclosure, 9 Position, 22.5mm
 
Alternative Views:


Price: $170.14
MFG P/N: SCE-9PBHI
MFG: Saginaw Control & Engineering
Weight (lbs): 10



Availability:
In Stock
Product Code: SCE-9PBHI
Qty:

Description
 

Saginaw Control & Engineering SCE-9PBHI is a 9 position hinged push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and 22.5mm pushbutton entrances in a 3x3 configuration. Designed for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture.

  • 10.13" H x 10" W x 6" D (257.3mm x 254mm x 152.4mm)
  • Continuously welded seams
  • Cover screws thread into sealed wells
  • Continuous bolt-on hinge with stainless steel hinge pin
  • Works with any brand of oil-tight push buttons, switches, or pilot lights
  • 4 way standard push button entrance
  • Gasket is oil & water resistant
  • Welded mounting plates located on the back at the top and bottom
  • Powder coating on both the inside and outside
  • Ground stud on door
  • Sub-panel supported by standoffs (sold separately)
  • IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Saginaw 9 Position Hinged Push Button Box SCE-9PBHI


Related Products
Saginaw Steel Sub-Panel, for 10" x 10" Enclosure
Price: $8.44

Add
Saginaw SCE-10P10 Steel Sub-Panel