 |
Hirschmann GDM 2009 J Gray Solenoid Valve Connector with center screw and 3-21 Flat Gasket (P/N: GDMZRG2903210, Hirschmann order code: 931236-106 + 731739-004) The GDM 2009 DIN 43650 / ISO 4400 (EN 175301-803) Form A connector has 2 Poles + Ground, an 18 mm Pin Spacing, gray fiberglass reinforced polyamide housing, and a PG 9 cable entry which accommodates 4.5 mm to 7 mm cable. Hardwired. Type of connection: screw termination. The GDM-series durable rectangular connectors can stand up to high loads, and are dust and hose-proof to IP 65 standards. The GDM 2009 J Gray is a tailored versatile industrial connector that can be used for nearly any application where hydraulic, pneumatic and electro-magnetic actuators have to provide dependable service. Mainly used as a solenoid valve or sensor connector. The rectangular connectors of the GDM-series are well-equipped to meet the demands of field operation.
What's Included: (1) GDM 2009 J Gray Connector, (1) M3 x 35mm Nickel Plated Brass Center Screw & (1) 3-21 EPDM Flat Gasket.
- Installation-friendly, thanks to a large pinplate cable connecting area
- High flexibility in terms of cable diameter and length
- No compromises in safety: international VDE, UR, CSA, GL approvals
- Patent-protected combination clamp for connecting stranded wires, fork-type cable lugs or ring eyelets
- For voltages up to 400 VDC and for currents up to 16 Amps
- Protection class up to IP 65
- Note: See images for drawings
Specifications
- Housing Color- Grey
- Type of Contact- screw termination / cable shoe / cable eye
- Contact Spacing- 18 mm
- Number of Poles- 2 Poles + Ground
- Housing Dimensions- 34.2mm H x 51mm L x 27.5mm W
- Cable Entry- PG 9 - Accommodates 4.5 mm to 7 mm cable
- Maximum Conductor Size- 16 AWG
- Center Screw- M3 x 35
- Gasket- GDM 3-21: Flat EPDM- Resists fuel oil, high/low temps, aging, impervious to gas
- Nominal Current- 250 VAC / 16 amps
- Operating Temperature- -40 F to +257 F
- Protection Class- IP 65
- Contact Resistance- <= 4 mOhm
- Contact Surface Material- Sn
- Contact Bearer Material- PA
- Contact Bearer Housing- PA
- Inflammability Class Housing- 94 HB
- Inflammability Class Contact- 94 V0
- Approvals- UR, VDE, SEV, CSA, CE, ROHS
The Hirschmann GDM series of solenoid valve connectors was made specifically to meet the demands of hydraulic, pneumatic and electromagnetic actuator and sensor installations. When your application requires a rugged solution, the GDM-series is totally within its element. For this reason, the GDM 2009 J connector has a high load capacity and is used with solenoid valves, pressure sensors, flow controllers and in heating equipment in control systems for gas appliances and oil burners. Even in vibration-endangered devices and structural components, such as construction machines or in conveyor installations, it is possible to have a highly dependable solution using crimp technology. With optional built-in electronic components such as rectifiers, optical status displays and protective elements, the GDM-series can be connected to devices where these functions have not been added. Last but not least, the GDM-series can be used wherever a "metal-free" environment is required, for example in the food sector, or the chemical industry
Hirschmann 2 + Ground DIN 43650 Gray Solenoid Valve Connector
|
|
|
