|
More Interfaces
|
|
Power supply/signaling contact
|
1 plug-in terminal block, 6-pin
|
|
V.24 Interface
|
1 x RJ11 socket
|
|
USB Interface
|
1 x USB to connect the AutoConfiguration Adapter ACA21-USB
|
|
Network size - Length of cable
|
|
Multimode fiber (MM) 50/125 µm
|
0 - 5000 m, 8 dB link budget at 1300 nm, A = 1 d/km, 3 dB reserve, B = 800 MHz x km
|
|
Multimode fiber (MM) 62.5/125 µm
|
0 - 4000 m, 11 dB link budget at 1300 nm, A = 1 dB/km, 3 dB reserve, B = 500 MHz x km
|
|
Network size - Cascadibility
|
|
Line - / star topology
|
any
|
|
Ring structure (HIPER-Ring) quantity switches
|
50 (reconfiguration time < 0.3 sec.)
|
|
Power requirements
|
|
Operating voltage
|
12/24/48 V DC (9,6-60) V and 24 V AC (18-30) V (redundant)
|
|
Current consumption at 24 V DC
|
321 mA
|
|
Current consumption at 48 V DC
|
161 mA
|
|
Power output in Btu (IT) h
|
26.3
|
|
Software
|
|
Management
|
Serial interface, web interface, SNMP V1/V2, HiVision file transfer SW HTTP/TFTP
|
|
Diagnostics
|
LEDs, log-file, relay contact, RMON, port mirroring 1:1, topology discovery 802.1AB, address conflict detection, network error detection, SFP diagnostic [temperature, optical input and output power], Trap for configuration saving and changing, duplex mismatch detection, disable learning.
|
|
Configuration
|
Command line interface (CLI), TELNET, BootP, DHCP, DHCP option 82, HIDiscovery, easy device exchange with auto-configuration adapter ACA21-USB (automatic software and/or configuration upload), automatic invalid configuration undo, configuration signature (water marking)
|
|
Security
|
Port Security (IP und MAC) with multiple addresses, SNMP V3 (no encryption)
|
|
Redundancy functions
|
HIPER-ring (ring structure), MRP (IEC-ring functionality), RSTP 802.1D-2004, redundant network/ring coupling, MRP and RSTP in parallel, redundant 24 V power supply
|
|
Filter
|
QoS 4 classes, port priorisation (IEEE 802.1D/p), VLAN (IEEE 802.1Q), shared VLAN learning, multicast (IGMP Snooping/Querier), multicast detection unknown multicast, broadcast limiter, fast aging
|
|
Industrial Profiles
|
EtherNet/IP and PROFINET (2.2 PDEV, GSDML stand-alone generator, automatic device exchange) profiles included, configuration and diagnostic via automation software tools like e.g. STEP7, or Control Logix
|
|
Time synchronization
|
SNTP server, PTP / IEEE 1588
|
|
Flow control
|
Flow control 802.3x, port priority 802.1D/p, priority (TOS/DIFFSERV)
|
|
Presettings
|
Standard
|
|
Ambient conditions
|
|
Operating temperature
|
0 C to +60 C
|
|
Storage/transport temperature
|
-40 C to +70 C
|
|
Relative humidity (non-condensing)
|
10% to 95%
|
|
MTBF
|
53.5 years (MIL-HDBK-217F)
|
|
Protective paint on PCB
|
No
|
|
Mechanical construction
|
|
Dimensions (W x H x D)
|
74 mm x 131 mm x 111 mm
|
|
Mounting
|
DIN Rail
|
|
Weight
|
410 g
|
|
Protection class
|
IP20
|
|
Mechanical stability
|
|
IEC 60068-2-27 shock
|
15 g, 11 ms duration, 18 shocks
|
|
IEC 60068-2-6 vibration
|
1 mm, 2 Hz-13.2 Hz, 90 min.; 0.7 g, 13.2 Hz-100 Hz, 90 min.; 3.5 mm, 3 Hz-9 Hz, 10 cycles, 1 octave/min.; 1 g, 9 Hz-150 Hz, 10 cycles, 1 octave/min
|
|
EMC interference immunity
|
|
EN 61000-4-2 electrostatic discharge (ESD)
|
6 kV contact discharge, 8 kV air discharge
|
|
EN 61000-4-3 electromagnetic field
|
10 V/m (80 - 1000 MHz)
|
|
EN 61000-4-4 fast transients (burst)
|
2 kV power line, 1 kV data line
|
|
EN 61000-4-5 surge voltage
|
power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
|
|
EN 61000-4-6 conducted immunity
|
3 V (10 kHz - 150 kHz), 10 V (150 kHz - 80 MHz)
|
|
EMC emitted immunity
|
|
FCC CFR47 Part 15
|
FCC CFR47 Part 15 Class A
|
|
EN 55022
|
EN 55022 Class A
|
|
Approvals
|
|
Safety of industrial control equipment
|
cUL 508
|
|
Hazardous locations
|
ISA 12.12.01 Class 1 Div. 2
|
|
Scope of delivery and accessories
|
|
Scope of delivery
|
device, terminal block, operating manual
|
