Home > Industrial Ethernet Switches > Hirschmann Ethernet Switches >

Hirschmann OCTOPUS 5TX-EEC 5 Port Waterproof Unmanaged Switch

OCTOPUS 5TX-EEC
Hirschmann 943892001 OCTOPUS 5TX-EEC 5 Port Waterproof Unmanaged Switch
  
Alternative Views:
Price: $446.57
Note: Please call or email [email protected] for alternatives
MFG P/N: 943892001
MFG: Hirschmann / Belden
Weight (lbs): 0.46

Quantity in Stock :(Out of Stock)


Availability: Out of Stock
Product Code: 943892-001
Qty:

  
Description
 

The Hirschmann OCTOPUS 5TX-EEC (P/N: 943892-001) is an IP 67 rated waterproof switch featuring store and forward switching, Ethernet (10 Mbit/s) and Fast Ethernet (100 Mbit/s). It also includes 5 x 10/100BASE-TX, M12 D coding, 4 pole, TP cable, auto-crossing, auto-negotiation & auto-polarity. The OCTOPUS 5TX-EEC meets IEEE 802.3 standards and can be used in under the more extreme conditions found outside. It is especially useful in the transportation industry and provides a low cost solution to meeting the needs of your network. Any accessories that are used with this switch may not carry the same certifications/specifications, such as IP rating or operating temperature, of the OCTOPUS 5TX-EEC.

  • (5) 10/100BASE-T(X) port allows for single devices or complete network segments.
  • Frame Switching Functions
    • Store and Forward - only forward valid frames and discards invalid frames
    • Multi address capability - learns up to 1,000 addresses. This becomes necessary if more than one terminal device is connected to one or more ports.
    • Learnt addresses - monitors the age of the learned addresses. The OCTOPUS deletes address entries from the address table which exceed a certain age (300 seconds).
    • Tagging - IEEE 802.1 Q standard designates the VLAN tag to be included in a MAC data frame for the VLAN and prioritizing functions.
  • Functions of the TP/TX Interface
    • Auto polarity exchange - If the receive line pair is incorrectly connected (RD+ and RD- switched) polarity is automatically reversed.
    • Auto-negotiation - a procedure in which the switch automatically selects the operating mode of its 10/100 RJ-45 ports.
    • Auto-crossing - automatically configures its port for the correct transmit and receive pins
  • Additional Functions and Features
    • The OCTOPUS 5TX-EEC will be reset when input voltages falls below a threshold. After a reset it will re-initialize.
  • Display Elements
    • Equipment status - provides information about statuses which affect the function of the entire SPIDER.
    • Power - when lit indicates supply voltage present
    • Port Status - display port-related information.
    • Data & Link status - indicates data traffic and rate

Hirschmann OCTOPUS 5TX-EEC Manual

Hirschmann OCTOPUS Ethernet Switch
Additional Product Information

Specifications

More Interfaces
Power supply/signaling contact 1 x M12 5-pin connector, A coding / no signal contact (fault relays)
Network size - Length of cable
Twisted pair (TP) 0 - 100 m
Network size - Cascadibility
Line - / star topology any
Power requirements
Operating voltage 9.6 - 32 V DC
Power consumption max. 2.4 W
Current consumption at 24 V DC max. 100 mA
Service
Diagnostics LEDs (power, link status, data)
Ambient conditions
Operating temperature -40 C to +70 C
Storage/transport temperature -40 C to +85 C
MTBF 135.6 years; MIL-HDBK 217F: Gb 25 C
Mechanical construction
Dimensions (W x H x D) 60 mm x 126 mm x 31 mm
Mounting Wall mounting
Weight 210 g
Protection class IP67
Mechanical stability
IEC 60068-2-27 shock 15 g, 11 ms duration, 18 shocks
IEC 60068-2-6 vibration 3.5 mm, 3 Hz - 9 Hz, 10 cycles, 1 octave/min.; 1g, 9 Hz - 150 Hz, 10 cycles, 1 octave/min.
EMC interference immunity
EN 61000-4-2 electrostatic discharge (ESD) 4 kV contact discharge, 8 kV air discharge
EN 61000-4-3 electromagnetic field 10 V/m (80 - 1000 MHz)
EN 61000-4-4 fast transients (burst) 2 kV power line, 1 kV data line
EN 61000-4-5 surge voltage power line: 2 kV (line/earth), 1 kV (line/line), 1 kV data line
EN 61000-4-6 conducted immunity 10 V (150 kHz - 80 MHz)
EMC emitted immunity
FCC CFR47 Part 15 FCC CFR47 Part 15 Class A
EN 55022 EN 55022 Class A
Approvals
Safety of industrial control equipment cUL 508
Employment in vehicles E1
Scope of delivery and accessories
Scope of delivery 2 covers for sealing unused ports, M12-connector for power connection, description and operating instructions

Unmanaged Ethernet Switch Comparison Chart