The Fandis FF15A115UF is a 250mm, 115Vac Gray Fan Filter Assembly. Air circulation moves at a rate of 135/159 CFM, with a power consumption of 31W. It has a life expectancy of 80,000 hrs and a noise level of 50/55 dB(a). The Fandis FF series features technical enhancements, and is meant to be an update to the older FPF series. Storage temperature: -40 C to 70 C (-40 F to 158). UL Approved.

• Can be installed without needing screws
• Possible attachment with screws for thicker cabinets (not supplied)
• Plate thickness between 1.3 and 3.7 mm.
• ABS/PC alloy plastic components
• Color RAL 7035 Gray
• Polyurethane foam permanent sealing gasket
• Thermo-linked progressive structure synthetic fiber filter media
• Standard airflow
• Rated IP54
• UL E237844, CE, CSA approved

Fandis FF Series Fan Filter Assembly Downloads

Specifications

The FF15AF series of fan systems are intended to filter and cool control cabinets, automation equipment & electronics. Several problems, such as data loss, equipment damage or performance failure can occur if the temperature inside an electronic device gets too high. This fan provides the cabinet with ventilation, while keeping inside temperatures down. The filter media protects inside components from dust and debris. As a non-active system, the FF series filter fans control the temperature using the ambient air.

The installation process is simple and efficient. You can just push the filter into the square opening without needing tools. Sliding catches help in the attachment or removal of the cover. This also allows replacement of the filter media from the outside. The seal between the base and cover has been replaced by ribbing that directs water runoff to the outside. Direction of airflow is from the outside to the inside of the cabinet.

Fandis fan filter assembly part number guides

Fandis FF15A115UF Cabinet Fan with Filter