 |
 |
 |
|
The Mencom LP1-E45UM-5 panel interface Ethernet switch has five 10/100 RJ45 ports (one outside port, four inside ports) in a single cover housing. Housing is rated IP 65 and has a sliding lock mechanism that can be operated with a flat head screwdriver. It attaches to the outside of the control panel, so as not to take up DIN-Rail space. The low profile housing is 75% lower than a standard PIC, & has a clear cover to view the components inside.
Specifications
- Body- Nickel Plated Zinc
- Front Cover- Polycarbonate
- Latch & Lock- PBT
- Gasket- PUR FIPG
- Housing- Single Cover Low Profile Housing
- Housing Dimensions- 4.6" Height x 2.57" Width x 4.7" Length
- Mounting Screw Torque- 0.8 N-m
- Terminal Block Torque- 0.5 N-m
- Incoming Power Wire Size- 0.25 - 2.5 sq mm/12-24 AWG
- Wire Strip Length- 7-8mm
- Panel Thickness- 5mm max.
- IP Rating- IP 65 (Total protection from dust and low pressure water jets from any direction)
ETHERNET
- Transmission Rate- 10/100Mbps
- RJ45 Ports- 5
- Auto MDI/MDI-X- Yes
POWER MANAGEMENT
- Input Voltage- 9-30V DC
- Amps- Max. 0.6 A
- Consumption- Max. 5.4 W
- Connector- Dual 3 pin 5.08mm Pitch Terminal Block
ENVIRONMENTAL LIMITS
- Operating Temperature- -10 C to 70 C (14 F to 158 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Humidity- 5-95% RH
APPROVALS
- Safety- UL60950-1,CSA C22.2 No.60950-1-03
- FCC (EMI)- FCC 47 CFR Part15, Subpart B, Class A, ICES-003, Class A, ANSI C63.4-2003
- CE (EMI)- EN 55022:1988+A1:2000+A2:2003, Class A, EN 61000-3-2:2000, Class A, EN 61000-3-3: 1995+A1:2001
- CE (EMS)- EN 55024:1998+A1:2001+A2:2003, IEC 61000-4-2:2001, IEC 61000-4-3:2002+A1:2002, IEC 61000-4-4:2004, IEC 61000-4-5:2001, IEC 61000-4-6:2003+A1:2004, IEC 61000-4-8:2001, IEC 61000-4-11:2004
- Shock- IEC 60068-2-27
- Free Fall- IEC 60068-2-32
- Vibration- IEC 60068-2-6
- RoHS- Lead Free
- MTBF- 455736 hrs(25 C) / 52.02 years(25 C)
Mencom LP1-E45UM0 PIC Ethernet Switch Instruction Manual
|
|
|
 |
|
 |
|
