|
The Teltonika RUT950W02400 is a compact industrial router with 4G cellular. It has 4 RJ45 ports, 1 I/O port, 2 SIM slots, and 4 SMA connectors. North American operation. Housed in a metal DIN rail enclosure, it is made to be used as a primary or backup Internet source. It features WiFi capability with Hotspot functionality.
PRODUCT FEATURES
- Compact Housing
- 4G LTE (Cat 4), 3G, 2G
- Dual SIM
- WAN Failover - Switches to backup connection
- Ideal for applications that need high throughput and data redundancy
- (4) RJ45 Ethernet ports, 10/100 Mbps
- (1) Digital Input, (1) Digital Output on 4 pin power connector (available from HW revision 1600)
- (1) bi-color connection status LED
- (5) connection strength LEDs
- (4) LAN status LEDs
- (1) Power LED
- (2) SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
- (1) 4-pin power Connector
- (2) SMA for LTE antennas
- (2) RP-SMA for WiFi antennas
- Reboot/User Default/Factory reset button
- Includes- Router, 9W power supply, 2 LTE antennas, 2 WiFi antennas, 1.5 meter Ethernet cable, SIM adapter kit, RMS flyer, quick start guide
SPECIFICATIONS
Mobile Mobile Module- 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps SIM Switch- 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection Status- Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID SMS- SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP Black/White List- Operator black/white list Band Management- Band lock, Used band status display APN- Auto APN Bridge- Direct connection (bridge) between mobile ISP and device on LAN Passthrough- Router assigns its mobile WAN IP address to another device on LAN
Wireless Wireless Mode- IEEE 802.11b/g/n, Access Point (AP), Station (STA) WiFi Security- WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation SSID- SSID stealth mode and access control based on MAC address WiFi Users- Up to 100 simultaneous connections Wireless Hotspot- Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
Ethernet WAN- (1) WAN port (can be configured to LAN) 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX LAN- (3) LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Network Routing-Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP) Protocols- TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) VoIP Passthrough Support- H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection Monitoring- Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall- Port forward, traffic rules, custom rules DHCP- Static and dynamic IP allocation, DHCP Relay, Relayed QoS / Smart Queue Management (SQM)- Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e DDNS- Supported >25 service providers, others can be configured manually Network Backup- VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover Load Balancing- Balance your internet traffic over multiple WAN connections
Security Authentication- Pre-shared key, digital certificates, X.509 certificates Firewall- Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T Attack Prevention- DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) VLAN- Port and tag based VLAN separation Mobile Quota Control- Set up custom data limits for both SIM cards WEB Filter- Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only Access Control- Flexible access control of TCP, UDP, ICMP packets, MAC address filter Secure Boot- Cryptographic integrity check of the each system boot process (available on device with special order code RUT950U072C0)
VPN Open VPN- Multiple clients and server can be running simultaneously, 12 encryption methods Open VPN Encryption- DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPsec- IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) GRE- GRE Tunnel PPTP, L2TP- Client/Server services can run simultaneously Stunnel- Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code DMVPN- Method of building scalable IPsec VPNs SSTP- SSTP client instance support ZeroTier- ZeroTier VPN WireGuard- WireGuard VPN client and server support
Modbus
TCP Slave- ID Range- Respond to one ID in range [1;255] or any Allow Remote Access- Allow access through WAN Custom Registers- MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality TCP Master- Supported Functions- 01, 02, 03, 04, 05, 06, 15, 16 Supported Data Formats- 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Data to Server Protocol- HTTP(S), MQTT, Azure MQTT
MQTT Gateway- Allows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3 Supported Modes- TCP Master, DNP3 Outstation Monitoring & Management
WEB UI- HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log FOTA- Firmware update from sever, automatic notification SSH- SSH (v1, v2) SMS- SMS status, SMS configuration, send/read SMS via HTTP POST/GET Call- Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off TR-069- OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTT- MQTT Broker, MQTT publisher SNMP- SNMP (v1, v2, v3), SNMP trap JSON-RPC- Management API over HTTP/HTTPS MODBUS- MODBUS TCP status/control RMS- Teltonika Remote Management System (RMS) IoT PlatformsCloud of Things- Allows monitoring of: Device data, Mobile data, Network info, Availability ThingWorx- Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Cumulocity- Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP Azure IoT Hub- Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server System CharacteristicsCPU- Atheros Wasp, MIPS 74Kc, 550 MHz RAM- 128 MB, DDR2 Flash Storage- 16 MB, SPI Flash FirmwareConfiguration- WEB UI- Update FW from file, check FW on server, configuration profiles, configuration backup, restore point FOTA- Update FW/configuration from server RMS- Update FW/configuration for multiple devices Keep Settings- Update FW without losing current configuration Customization- Operating System- RutOS (OpenWrt based Linux OS) Supported Languages- Busybox shell, Lua, C, C++ Development Tools- SDK package with built environment provided Input / OutputInput- (1) Digital input, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high Output- (1) Digital open collector output, max output 30 V, 300 mA Events- SMS, EMAIL, RMS PowerConnector- 4 pin industrial DC power socket Input Voltage Range- 9 – 30 VDC, reverse polarity protection; surge protection >31VDC 10us max PoE (Passive)- Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards Power Consumption- < 2 W idle, < 7 W Max EnvironmentalHousing- Aluminum housing, plastic panels Dimensions- 110 mm Width x 50 mm Height x 100 mm Depth (4.33" x 1.97" x 3.94") Mounting Options- DIN rail (can be mounted on two sides), flat surface placement Operating Temperature- -40 C to 75 C (-40 F to 167 F) Operating Humidity- 10-90% non-condensing IP Rating- IP 30 (Protected from objects 2.5 mm (0.1") in diameter or greater) ApprovalsRegulatory- CE/RED, FCC, IC, PTCRB, RCM, EAC, RoHS, WEEE, IP rating, Anatel, GCF, TRA approval, REACH, DNV GL, Declaration of Software Security, Thailand NBTC, Ukraine UCRF, WiFi Certified, SDPPI (POSTEL) Operator- Verizon, AT&T
EMI Standards- Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 FCC 47 CFR Part 15B (2018), ANSI C63.4 (2014)
ESD- EN61000-4-2:2009 RS- EN 61000-4-3:2006 + A1:2008 + A2:2010 EFT- EN 61000-4-4:2012 Surge Immunity (AC Power)- EN 61000-4-5:2006 Surge Immunity (Ethernet)- EN 61000-4-5:2014, clause 7.1 of ITU-T K21 Transient & Surges- ISO 7637-2:2004 CS- EN 61000-4-6:2009 DIP- EN 61000-4-11:2004
RF Standards- EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1 AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017 FCC 47 CFR Part 15C, FCC 47 CFR Part 22H, FCC 47 CFR Part 24E, FCC 47 CFR Part 27
Safety Standards- IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 AS/NZS 60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310
Ingress Protection- LST EN 60529:1999+A1+AC:2002
Vibration- Class guideline-DNVGL-CG-0339:2016 EN 60068-2-6:2008
Teltonika Industrial 4G LTE Cat4 Cellular Router with 4 Ethernet Ports
|
|
|