The Menics MWEB-4FF-RYGBM 4 color LED wall mount signal light with alarm has a low profile white plastic housing and is rated for 110-220V. It has red, yellow, green, & blue LED colors behind a single white lens, with a steady & flashing light. Made for wall mounting. The signal light itself comes pre-wired with 800 mm (31.5") lead wire. Color & light mode is chosen based on the wiring (see wiring diagram). Useful in situations in which a pole mounted tower light would be impractical. Rated IP 52. Note: Clear lens pictured

Specifications

• Mounting- Wall Mount
• Housing Material- White Plastic with White Lens
• Lens Material- Polycarbonate Resin
• Light Operation- Steady & Flashing w/ Alarm
• Power Supply- 110-220V AC
• Current Consumption- 0.07 Amps
• LED Colors- Red Yellow Green & Blue
• Number of LED Colors- 4
• Dimensions- 194 mm Height x 90 mm Width x 40 mm Depth (7.64" x 3.54" x 1.57")
• Flash Rate- 85 times per minute
• Buzzer Volume- 75 dB (at 1 Meter)
• Vibration Resistance- 0.75 mm @ 10-55Hz
• Dielectric Strength- 1000VAC 50/60Hz for 1min
• Insulation Resistance- 100 MΩ minimum (500VDC mega)
• Ambient Temperature- -20 C to 40 C (-4 F to 104 F)
• Storage Temperature- -20 C to 70 C (-4 F to 158 F)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 52 (Partial protection from dust and droplets up to 15 degrees from vertical)
• Approvals- UL Listed, CE, RoHS

Menics MWEB-4FF-RYGBM 4 Color 110-220V Wall Mount White Lens LED Signal Light